Відео

That is something I would very much like to do, and add a few other features... 😎

thank you.

You can buy the stl files to print your own but I don't sell parts or finished models I'm afraid. 🙂

You can begin by adjusting the trim settings on the transmitter. If you need to adjust it further you may need to the the servo horn off, centre the trim, refit the servo horn and then adjust the trim again. Check to see if all the wheels are rotating freely. If one is sticking that can pull the car to one side. Finally you can adjust the length of the steering track rods to create 1-2 degrees of 'toe-in' this will make the car more stable in a straight line. Hope this helps. 🙂

Thanks, glad you liked it. The turret may be a project for the future....🤔

@@StaplesandVine defo another video to watch.

Thank you for the kind comment. Modern technology certainly helps us realise those crazy ideas we get from time to time. Fortunately this one turned out OK. 😎

It's OK, I've cut them since the video was filmed.

Thanks for the great comment. The grease does seem to disappear. I suggest assembling the diffs have a play with them for 5 minutes then open one up to see where the grease is. Quite a lot ends up on the casing not the gears. It is a balancing act but I have never had a diff issue. 🤔 More TT-02 coming soon. 😁

Totally agree it looks so 😎 but off road - forget it.... unless you have a beach handy. 😁

Glad you like my channel. Great to have you on board, please enjoy. 🙂

Thank you! Cheers! 🙂

Sadly they don't make them like that anymore.... 😔

БОЛЬШОЕ СПАСИБО. РАД, ВАМ ПОНРАВИЛСЯ МОЙ ПРОЕКТ 🙂🙂

@@StaplesandVine Ты американец ?You american man ?

Нет, английский с базовым знанием Google Translate. 😁

@@StaplesandVine через гугл переводчик ???

@@StaplesandVine Я занимаюсь ремонтом игрушек на РУ и детских электромашин иногда реставрирую если есть матерьял средства и желание мои работы есть на канале

Thank you, yes it did have all wheel steering but I wanted to keep the build as straight forward as possible so others could recreate it. I am looking at a Mk 2 with all the options.... 🙂

Thank you. 😎

Hi Robert, just checked there was an error on the file. I don't know why mine printed OK but I have emailed you a revised file.

@@StaplesandVine thanks for the new file but a little to late as I have all ready glued the sections together . Just means I have to cut a hole in the side

Thank you, that's very kind. I have a follow up in the works. Something a little more special. 🙂

Thank you, it had its moments but I solved most of the problems. 🙂

You have good taste. 🙂

Thank you. Yes the famous Achilles heel of the APC .... Ripley. 😁

It's part Tardis, part brick, but looks very 😎

Thank you, glad you like my video. The music for the 'running section' is 'Tropic Fun' by Maiwan from Epidemic Sounds. Hope this helps. 🙂

@@StaplesandVine Thanks for the reply! I can't make it to be the same song, the one I'm after starts at @55:39 and seems to end at @58:55 just when the running section starts. I'm sorry for not being more precise with my question, if you have the time and energy to check for the section just before the running part, I would be very grateful. If not, its ok. 😃

Hi Chris, no problem, the track is - 'I see that you know Judo well' by Jones Meadow from Epidemic Sounds. 🙂

Thank you. 🙂

Thank you, she came out well in the end. 🙂

Thanks for the tip. I tried a few on other builds. Still looking for the best option... 🙂

Thank you. If you like this check out my Slave 1 build. 😎

Thanks for the interest in my APC. I am working with www.solo3dstudio.com/ who will be exclusively offering prints of my APC. 🙂

@@StaplesandVine Cheers!

If only... The glass still breaks though. 😁

Thanks, Yes filler primer is a great option. 😎

Thank you, glad you enjoyed my build. 🙂

Thanks. A real one would be outstanding. 😎😎😎

Thank you, I will be selling the files for the entire MILANO once it is completed. No plans for a separate cockpit though. 🙂

@@StaplesandVine entire project? okay that is awesome..

The APC was a quick break that got out of hand.... back on the MILANO now. 🙂

@@StaplesandVine cant wait to see it bro!! i already subscribe.

Thanks, glad you liked the build. Check out episode 5 for the 1/16 RC version.... 😎

@@StaplesandVine I did, its amazing. Shared it with friends too!

Thanks, that's much appreciated... 🙂

I only sell the files not finished models, sorry. 🙂

Glad you like my APC build. Here's a link to my site - www.staplesandvine.com/index.php/product/m577-apc/ 🙂

Thank's, that's very kind of you. 🙂

Thank you, it's not perfect but it looks real enough. 🙂

'Outstanding....'

Thank you, it is a lot of work but well worth the effort. 🙂

Totally agree the rims didn't last long on the tarmac aero discs are a way better option, and better tyres are a must. Glad you like my 2S solution, thanks. 🙂

The files for 3D printing are available here - www.staplesandvine.com/index.php/product/m577-apc/ I don't sell finished APCs I'm afraid. 🙂

Thank you, check out my SLAVE 1 build if you like the APC. 🙂

Thank you! Cheers! 🙂

You're welcome, I hope you enjoy your TT-02, what body did you go for? I'm currently building a full custom TT-02 (coming soon).... 🙂

@@StaplesandVine Mercedes Clk Amg 2002 😄😄

Great choice, that is one good looking car.... 😎😎😎

@@StaplesandVine wait for until I paint it! 😂😂

It would be amazing if they did, so 😎. But unfortunately the design is flawed on many levels for real world use.... 😟

Thanks for the great comment and for subscribing to my channel. The seaweed was a 'happy accident'. 😁

Yes it will be rather large.... 🥴 I reckon about 1M long. 😎

Thank you, glad you enjoyed my APC build. Yours is just a click away..... 😁

No harm done, Ripley wasn't driving.... 😁

Thank you, check out the later videos for version 2.0..... 😎